DIY Sea Glass Stepping Stone

DIY Sea Glass Stepping Stone

Colourful Sea Glass Stepping Stones

Sea glass can have romantic origins — it could come from old victorian bottles or broken glass from a shipwreck. Most of the time it comes from modern day bottles. Most of the rubbish that ends up in the sea doesn’t have a happy ending, but glass is a different story. The motion of the waves and the grinding from stones and sand polishes each shard into a soft and jewel-like piece.

Collecting Sea Glass

After spending a week in Venice I had a couple of days to myself before having an old friend visit me in the Isle of Man. I hadn’t seen her in over a year and we spent the time listening to music from ‘the old days’ and catching up on our lives and everything that’s happened since we last spent time together.

Though the weather wasn’t that great we also spent some time camping on the beach and scouring the local beach for sea glass. There’s something so childlike and primal in hunting for colourful shards of glass. The whoop of excitement from a thirty-something can’t be all that different from one coming from a nine year old.

In an hour of hunting for our sea jewels we collected quite a pile of coloured glass, bits of pottery, and small shells and rocks. Now to make something beautiful and useful for the garden.

First off you’ll need a few materials

This project will take you about two days to complete (most of that time is letting the stone dry) and costs about $25-30. That cost includes enough material to make a five or more stepping stones though.

• 1. An old pan or plastic tub to use as a mould
• 2. Cement and coarse Aggregate (basically a mixture of sand and gravel) Or get both of these together pre-mixed Quikrete Concrete Mix Bag 10 Lbs
• 4. Sea glass and any other hard stones, shells, pottery, or objects you’d like to embed into your stepping stone.
• 5. A square of chicken wire or other metal fencing that will fit inside your mould

Step 1: Spray Paint

Using your matte white spray paint, paint one side of the beach glass you want to embed in your stone – the side that you want to be pushed into the concrete. If you don’t paint one side then the dark colour of the concrete will make your glass look dark and murky since the grey colour will come through the glass.

Step 2: Cement

Mix one part cement with 3.5 parts aggregate or use the material from the pre-mixed bag I have listed above. I used an large yoghurt container for measurement but the exact amounts will depend on the size of your own mould. Next, add enough water to make it wet but not soupy. If it’s too wet then the decorations will sink.

Step 3: Filling the Mould

Fill your mould half-way with your wet concrete mix then place the square of wire on top. Fill the rest of the mould with concrete and completely cover the wire. This extra addition to the inside of your stone will give it more stability and help ensure it doesn’t split in the future.

Step 4: Optional Gold Finish

Spray the surface of the concrete with gold. It will look garish at first but the gold will add some beach-sand like shine to the dull concrete when you’re finished.

Step 5: Adding the Sea Glass

Create your sea glass design by pressing pieces into the wet cement. Push them in firmly or they may come off eventually. When you’re finished, allow the stone to set for at least a day though I gave mine two days before I popped it out of the mould. To get the stone out, turn your mould over something soft (like grass) and shake it out – it should pop out easily.

Step 6: Clear Varnish

Clean the glass in the stone off with water and an old toothbrush. When it’s dried, spray the top with clear spray paint to give the pieces that wet look.

Step 7: Siting your Stone

Dig a depression in the area you wish your stone to be placed and set it inside. Doesn’t it look beautiful? I hope you’ve enjoyed this tutorial and if you’d like to see more of my crafty ideas please browse through my projects here.

Original article and pictures take lovelygreens.com site